Dell PowerVault MD3000 - Manual (Page 198)

198
Script Commands
Parameters
Show Physical Disk Channel Statistics
This command shows cumulative physical disk channel data transfer and
error information. If the RAID controller module has automatically degraded
a channel, this command also shows interval statistics. When using this
command, you can display information about one specific physical disk
channel, several physical disk channels, or all physical disk channels.
Parameter Description
allPhysicalDisks Returns information about all physical disks in
the storage array.
NOTE:
To determine information about the type
and location of all physical disks in the storage
array, use the allPhysicalDisks parameter.
physicalDiskType Specifies the type of physical disk for which to
retrieve information. Valid physical disk types are
SAS or SATA.
NOTE:
To determine the information about the SAS
or SATA physical disks in the storage array, use the
physicalDiskType parameter.
physicalDisk or physicalDisks Identifies the enclosure and slot where the
physical disk resides. You can enter enclosure IDs
and slot IDs for one or several physical disks.
Enclosure ID values are 0 to 99. Slot ID values
are 0 to 31. You must put parentheses around the
enclosure ID values and the slot ID values.
summary Returns the status, capacity, data rate, product
ID, and firmware version for the specified
physical disks.
NOTE:
To determine the type of physical disk in a
specific location, use the physicalDisk parameter,
and enter the enclosure and slot IDs for the
physical disk.