Dell PowerVault MD3000 - Manual (Page 165)

Script Commands
165
NOTE:
If you have not reset the iSCSI baseline statistics since the RAID controller
module start-of-day, the time at the start-of-day is the default baseline time.
NOTE:
This command does not automatically append a file extension to the new
file. You must specify the file extension when you enter the file name.
Example
-c "save storageArray iscsiStatistics [raw] file =
\"testfile\";"
Save Storage Array Performance Statistics
This command saves the performance statistics to a file. Before you use this
command, issue the set session performanceMonitorInterval and set session
performanceMonitorIterations commands to specify how often statistics are
collected.
Syntax
save storageArray performanceStats file=" filename "
Parameters
Save Storage Array SAS PHY Counts
This command saves the storage array SAS PHY counters to a file.
Syntax
save storageArray SASPHYCounts file=" filename "
file The name of the file to which you want to save the performance statistics.
Enclose the file name in double quotation marks (“ ”).
Parameter Description
file Name of the file to which to save the performance
statistics. You must put quotation marks (" ") around
the file name.
Parameter Description