Dell PowerVault MD3000 - Manual (Page 178)

178
Script Commands
Set Physical Disk Hot Spare
This command assigns or unassigns one or more physical disks as a hot spare.
Syntax
set (physicalDisk [ enclosureID,slotID ] |
physicalDisks [ enclosureID0,slotID0 ...
enclosureIDn,slotIDn ]) hotSpare=(TRUE | FALSE)
Parameters
Set Physical Disk State
This command sets a physical disk to the failed state. To return a physical disk
to the Optimal state, use the revive physicalDisk command.
Syntax
set physicalDisk [ enclosureID,slotID ]
operationalState=failed
status Condition of the channel. You can set the channel status to
optimal or degraded.
NOTE:
Use the optimal parameter to move a degraded
channel back to the Optimal state. Use the degraded
parameter if the channel is experiencing problems, and the
storage array requires additional time for data transfers.
Parameter Description
physicalDisk or
physicalDisks Identifies the enclosure and slot where the physical disk
resides. Enclosure ID values are 0 to 99. Slot ID values
are 0 to 31. You must put brackets ([ ]) around the
enclosure ID values and the slot ID values.
hotSpare Assigns the physical disk as the hot spare. To assign the
physical disk as the hot spare, set this parameter to
TRUE. To remove a hot spare assignment from a
physical disk, set this parameter to FALSE.
Parameter Description