Dell PowerVault MD3000 - Manual (Page 161)

Script Commands
161
Parameters
Save Enclosure Log Data
This command saves the log data maintained by the EMM in all enclosures in
a storage array to a file.
Syntax
save allEnclosures logFile=" filename "
Parameters
Save Physical Disk Log
This command saves the log sense data to a file. Log sense data is maintained
by the storage array for each physical disk.
Syntax
save allPhysicalDisks logFile=" filename "
Parameters
Parameter Description
physicalDisk Identifies the enclosure and slot where the physical disk
resides. Enclosure ID values are 0 to 99. Slot ID values are 0
to 31. You must put brackets ([ ]) around the enclosure ID
value and the slot ID value.
Parameter Description
logFile Name of the file to which to save the EMM log data. You
must put quotation marks (" ") around the file name.
Parameter Description
logFile Name of the file to which to write the log sense data. You
must put quotation marks (" ") around the file name.