Dell PowerVault MD3000 - Manual (Page 196)

196
Script Commands
Parameters
Show Host Ports
For all HBA host ports connected to a storage array, this command returns the
following information:
• HBA host port identifier
• HBA host port name
• HBA host type
Syntax
show allHostPorts
Parameters
None.
Example
-c "show allHostPorts;"
Show Physical Disk
For each physical disk in the storage array, this command returns the
following information:
• The total number of physical disks
• The type of physical disk (SAS or SATA)
• Basic physical disk information:
– Enclosure location and slot location
– Status
– Capacity
– Data transfer rate
Parameter Description
diskGroup Number of the disk group for which to display
information. You must put brackets ([ ]) around
the disk group number.