Dell PowerVault MD3000 - Manual (Page 147)

Script Commands
147
Parameters
Download Storage Array NVSRAM
This command downloads NVSRAM values for the storage array RAID
controller module.
Syntax
download storageArray NVSRAM file=" filename "
Parameter Description
NVSRAM Specifies that you want to download a file
with NVSRAM values when you
download a firmware file. You must not
put brackets around this parameter.
Include a comma after the term firmware.
file File path and name of the file that
contains the firmware. Valid file names
must end with a .dlp extension. You must
put quotation marks (" ") around the file
name.
NVSRAM-filename File path and name of the file that
contains the NVSRAM values. Valid file
names must end with a .dlp extension.
You must put quotation marks (" ")
around the NVSRAM file name. You must
include a comma after the firmware file
name.
downgrade Specifies that you are loading firmware
that is a previous version. The default
value is FALSE. Set downgrade to TRUE
if you want to download an earlier version
of firmware.
activateNow Activates the firmware and NVSRAM
images. The default value is TRUE. If you
set activateNow to FALSE, you must use
the activate storageArray firmware
command to activate the firmware and
NVSRAM values at a later time.