Dell PowerVault MD3000 - Manual (Page 208)

208
Script Commands
6 Physical disk location
Enclosure t, slot s
7 Physical disk-relative logical block address
Hex format (0x nnnnnnnn)
8 Failure Type
The data is sorted first by virtual disk user label and second by the logical
block address (LBA). Each entry in the table corresponds to a single sector.
Syntax
show storageArray unreadableSectors
Parameters
None.
Show String
This command shows a string of text from a script file. This command is
similar to the echo command in the MS DOS and Linux operating systems.
Syntax
show " string "
Parameters
None.
NOTE:
You must put quotation marks (" ") around the string.
Show Unconfigured iSCSI Initiators
This command returns a list of initiators that have been detected by the
storage array but are not yet configured into the storage array topology.
Syntax
show storageArray
unconfiguredIscsiInitiators