Dell PowerVault MD3000 - Manual (Page 132)

132
Script Commands
freeCapacityIndexNumber userLabel=
" snapshotVirtualDiskName "
warningThresholdPercent= percentValue
repositoryPercentOfSource= percentValue
repositoryUserLabel=" repositoryName "
repositoryFullPolicy=(failSourceWrites |
failSnapShot) enclosureLossProtect=(TRUE | FALSE)]
Syntax (User-Defined Number of Physical Disks)
create snapshotVirtualDisk sourceVirtualDisk=
" sourceVirtualDiskName " [repositoryRAIDLevel=
0 | 1 | 5 repositoryPhysicalDiskCount=
numberOfPhysicalDisks
physicalDiskType=(SAS | SATA) userLabel=
" snapshotVirtualDiskName "
warningThresholdPercent= percentValue
repositoryPercentOfSource= percentValue
repositoryUserLabel=" repositoryName "
repositoryFullPolicy=(failSourceWrites |
failSnapShot) enclosureLossProtect=(TRUE | FALSE)]
Parameters
Parameter Description
sourceVirtualDisk Name of the source virtual disk from
which to take a snapshot. You must put
quotation marks (" ") around the source
virtual disk name.
repositoryRAIDLevel RAID level for the repository virtual disk.
Valid values are 0, 1, or 5.
repositoryPhysicalDisks Specifies the physical disks to assign to
the repository. Specify the enclosure ID
and slot ID for each physical disk assigned
to the virtual disk. Enclosure ID values
are 0 to 99. Slot ID values are 0 to 31. You
must put parentheses around the list of
repository physical disks.