Dell PowerVault MD3000 - Manual (Page 210)

210
Script Commands
• Snapshot repository virtual disks
• Snapshot virtual disks
• Copies
Syntax
show (allVirtualDisks | virtualDisk
[ virtualDiskName ] |
virtualDisks [ virtualDiskName1 ...
virtualDiskNamen ]) [summary]
Parameters
Show Virtual Disk Action Progress
For a long-running operation that is currently running on a virtual disk, this
command returns information about the virtual disk action and amount of
the long-running operation completed. The completed amount of the long-
running operation is shown as a percentage (for example, 25 means that
25 percent of the long-running operation is completed).
Syntax
show virtualDisk [" virtualDiskName "]
actionProgress
Parameter Description
allVirtualDisks Returns information about all virtual disks in the storage
array.
virtualDisk or
virtualDisks Specifies the name of the specific virtual disk from which
to retrieve information. You can enter more than one
virtual disk name. You must put brackets ([ ]) around the
virtual disk name. If the virtual disk name has special
characters, you must also put quotation marks (" ") around
the virtual disk name.
summary Returns a concise list of information about the virtual
disks.