Dell PowerVault MD3000 - Manual (Page 217)

Script Commands
217
Start Physical Disk Reconstruction
This command starts reconstructing a physical disk.
Syntax
start physicalDisk [ enclosureID,slotID ]
reconstruct
Parameters
Start Storage Array Blink
This command identifies a storage array by turning on the indicator LED for
the storage array. (Use the stop storageArray blink command to turn off the
indicator LED for the storage array.)
Syntax
start storageArray blink
Parameters
None.
Example
-c "start storageArray blink ;"
Start Virtual Disk Initialization
This command starts the formatting of a virtual disk in a storage array.
NOTE:
Initializing a virtual disk is a long-running operation that you cannot stop.
Syntax
start virtualDisk [ virtualDiskName ] initialize
Parameter Description
physicalDisk Identifies the enclosure and slot where the physical disk resides.
Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You
must put brackets ([ ]) around the enclosure ID value and slot
ID value.