Dell PowerEdge C6145 - Manual (Page 121)

Installing System Components | 121
Processors
The following tables list the limited configurations of the C6145 system for
proper thermal conditions:
Table 3-5. Limited Configuration Matrix for Proper Thermal Condition on 2-Node System
Processor
(G34 TDP) Hard Drive
QTY
Note
85 W
3.5" x12
2.5" x24 No PCI-E card on PCI-E slot 2
3.5” x8
2.5" x18
Support PCI-E cards on PCI-E slot 2 and slot 3
3.5" hard-drive blank and carrier should be put on the
four slots in the second row of the hard-drive slots as
Figure 1-1.
2.5" hard-drive blank and carrier should be put on the
hard-drive ID 10-12 and 22-24 as Figure 1-5.
115 W
3.5” x8
2.5" x18
Support PCI-E cards on PCI-E slot 2 and slot 3
3.5" hard-drive blank and carrier should be put on the
four slots in the second row of the hard-drive slots as
Figure 1-1.
2.5" hard-drive blank and carrier should be put on the
hard-drive ID 10-12 and 22-24 as Figure 1-5.
140 W 3.5" x8
No PCI-E card on PCI-E slot 2.
3.5" hard-drive blank and carrier should be put on the
four slots in the second row of the hard-drive slots as
Figure 1-1
and allow max ambient 30 o C.