Dell PowerEdge C6145 - Manual (Page 170)

170 | Installing System Components
clip snaps into place. See Figure 3-33.
Figure 3-33. Replacing the System Battery
1 system battery 2 positive side of battery connector
3 retention clip 4 negative side of battery connector
7 Install the system-board assembly. See “Installing a System-Board
Assembly” on page 116.
8 Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.
9 Enter the System Setup program to confirm that the battery is
operating properly. See “Using the System Setup Program” on page 46.
10 Enter the correct time and date in the System Setup program’s Time
and Date fields.
11 Exit the System Setup program.