Dell PowerEdge C6145 - Manual (Page 153)

Installing System Components | 153
Figure 3-24. Removing and Installing the SAS Mezzanine Card
1 screw (3) 2 SAS mezzanine card
3 SAS mezzanine-card bracket
Installing the SAS Mezzanine Card
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Align the SAS mezzanine card to the bracket by the three screw holes.
See Figure 3-24.
2 Replace the three screws to that secure the SAS mezzanine card to the
bracket. See Figure 3-24.
3 Install the SAS mezzanine-card assembly to the mezzanine-card bridge
board on the system-board assembly. See Figure 3-23.
4 Replace the three screws that secure the SAS mezzanine-card assembly
to the system-board assembly. See Figure 3-23.