Dell PowerEdge C6145 - Manual (Page 146)

146 | Installing System Components
Figure 3-20. Removing and Installing the LSI 9265-8i RAID Battery Assembly
1 screw (2) 2 LSI 9265-8i RAID battery assembly
3 system-board assembly
Installing the LSI 9265-8i RAID Battery Assembly
1 Place the LSI 9265-8i RAID battery assembly in position on the
system-board assembly. See Figure 3-20.
2 Replace the screws securing the LSI 9265-8i RAID battery assembly to
the system-board assembly. See Figure 3-20.
3 Connect the cable connecting to the LSI 9265-8i card.
4 Install the system-board assembly. See “Installing a System-Board
Assembly” on page 116.
5 Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.