Dell PowerEdge C6145 - Manual (Page 96)

96 | Using the System Setup Program
Token Setup Option Description
device as the system’s onboard network
controller, if present and enabled, or the first
bootable network device found in the
system’s standard PCI search order —
whichever comes first.
4023 Force PXE First
Disable the PXE boot override and the
system boot sequence is in effect.
4031 Quick Boot Enabled, skip the system memory tests.
4032 Quick Boot Disabled, execute the system memory tests.
4033 Serial Port Mode
Console Redirection baud rate will be set to
115,200 bits per second.
4034 Serial Port Mode
Console Redirection baud rate will be set to
57,600 bits per second.
4035 Serial Port Mode
Console Redirection baud rate will be set to
19,200 bits per second.
4036 Serial Port Mode
Console Redirection baud rate will be set to
9,600 bits per second.
4816 Force PXE BOOT Only Disable Force PXE Boot only.
4817 Force PXE BOOT Only Enable Force PXE Boot only.
481B NIC Function Support Onboard NIC support PXE ROM.
481C NIC Function Support Onboard NIC support iSCSI ROM.
481D Flow Control Set serial port flow control to none.
481E Flow Control Set serial port flow control to hardware.
481F Flow Control Set serial port flow control to software.
4820
VT-UTF8 Combo Key
Support
Disable VT-UTF8 combo key support.
4821
VT-UTF8 Combo Key
Support
Enable VT-UTF8 combo key support.
4822 BMC NIC Share BMC NIC.
4823 BMC NIC Dedicate BMC NIC.
4824 BMC IP address source Set BMC IP address to static.
4825 BMC IP address source Set BMC IP address to DHCP.
4826 WHEA Support Disable Windows 2008 R2 WHEA support.
4827 WHEA Support Enable Windows 2008 R2 WHEA support.