Dell PowerEdge C6145 - Manual (Page 174)

174 | Installing System Components
Opening the System
1 Recommend to turn off the system, including any attached peripherals,
and disconnect the system from the electrical outlet.
2 Remove the securing screw from the system cover. See Figure 3-35.
3 Press the cover release latch lock. See Figure 3-35.
4 Grasp cover on both the sides with your palm on the traction pad, slide
out and lift the cover away from the system. See Figure 3-35.
Figure 3-35. Opening and Closing the System
1 traction pad 2 system cover
3 cover release latch lock 4 securing screw
Closing the System
1 Place the cover on the chassis and slide it to the front of the chassis
until it snaps into place. See Figure 3-35.
2 Secure the cover with the securing screw. See Figure 3-35.