Dell PowerEdge C6145 - Manual (Page 14)

14 | About Your System
Item Indicator, Button
Or Connector
Icon Description
1,3 Power-on indicator/
power button
(motherboards 1,2) The power-on indicator lights
when the system power is on.
The power button controls the
DC power supply output to the
system.
NOTE: When powering on the
system, the video monitor can take
from several seconds to over 2
minutes to display an image,
depending on the amount of
memory installed in the system.
NOTE: On ACPI-compliant
operating systems, turning off the
system using the power button
causes the system to perform a
graceful shutdown before power to
the system is turned off.
NOTE: To force an ungraceful
shutdown, press and hold the
power button for 5 seconds.
2,4 System identification
indicator/button
(motherboards 1,2) The identification button can be
used to locate a particular system
and motherboard within a chassis.
When the button is pushed, the
blue system status indicator on
the front blinks until the button
is pushed again.
5 Hard Drives Up to twelve hot-swappable 3.5"
hard drives.
Up to twenty four hot-swappable
2.5" hard drives.
* Drive Cover Different for 2.5" hard drive
system and 3.5" hard drive system.