Dell PowerEdge C6145 - Manual (Page 154)

154 | Installing System Components
5 Reconnect all the cables to the SAS mezzanine card.
6 Install the system-board assembly. See "Installing a System-Board
Assembly" on page 116.
7 Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.
Cable Routing for SAS Mezzanine Card
1 Reconnect all the cables to the SAS mezzanine card. Make sure the
cables should go through the cable clip ring. See Figure 3-25.
Figure 3-25. Cable Routing for SAS Mezzanine Card