Dell PowerEdge C6145 - Manual (Page 73)

Using the System Setup Program | 73
Option Description
messages.
Wait For ‘F1’ if Error
(Disabled default) Wait for F1 key to be pressed if error occurs.
Hit ‘F2’ Message Display
(Enabled default)
Displays “Press F2 to run Setup” in POST.
Force PXE first
(Disabled default)
Forces the system to boot by PXE first.
Force PXE Boot only
(Disabled default) Forces the system to boot by PXE only.
Force USB First
(Disabled default) Forces the system to boot from USB first.
NOTE: The following list shows the priority of the boot options (high to low):
• “Force PXE BOOT Only”
• Select boot device by pop menu (press F11 during POST)
• “Force PXE First”, press F12 during POST
• “Force USB First”
• boot order in setup menu