Dell PowerEdge C6145 - Manual (Page 194)

194 | Installing System Components
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.
4 Replace the power distribution boards. See "Installing a Power
Distribution Board" on page 190.
5 Close the system. See "Closing the System" on page 174.
6 Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.
Cable Routing for Fan Control Board
Figure 3-48. Cable Routing−Fan Control Board
Item Cable From
(Fan Control Board) To
Hard-drive
backplane I
2 C
cable
Hard-drive backplane
connector (J17) Backplane
System fan System fan connectors System fans