Dell PowerEdge C6145 - Manual (Page 150)

150 | Installing System Components
Figure 3-22. Removing and Installing the Expansion-Card Connector
1 screw (2) 2 expansion-card bracket
3 expansion-card connector
Installing the Expansion-Card Connector
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Place the expansion-card connector into the expansion-card bracket.
See Figure 3-22.
2 Replace the two screws securing the expansion-card connector to the
expansion-card bracket. See Figure 3-22.
3 Install expansion card. See “Installing the Expansion Card” on page
127.
4 Install the system-board assembly. See "Installing a System-Board