Dell PowerEdge C6145 - Manual (Page 161)

Installing System Components | 161
system-board assembly. See Figure 3-28.
5 Reconnect all the cables to the Mellanox card.
6 Install the system-board assembly. See "Installing a System-Board
Assembly" on page 116.
Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.
Mezzanine-Card Bridge Board
Removing the Mezzanine-Card Bridge Board
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Recommend to turn off the system, including any attached peripherals,
and disconnect the system from its electrical outlet.
2 Remove the system-board assembly. See "Removing a System-Board
Assembly" on page 115.
3 Remove the mezzanine card. See “Removing the SAS Mezzanine Card”
on page 151 and “Removing the 10GbE Mezzanine Card” on page 154.
4 Pull the mezzanine-card bridge board away from the mezzanine slot on
the system board. See Figure 3-30.