Dell PowerEdge C6145 - Manual (Page 22)

22 | About Your System
Power and System Board Indicator Codes
The LEDs on the system front panel and back panel display status codes
during system startup. For location of the LEDs on the front panel, see
Figure 1-1 for 3.5
" hard drive and Figure 1-6 for 2.5 " hard drive systems. For
location of the LEDs on the back panel, see Figure 1-9.
Table 1-4 lists the status associated with the status codes.
Table 1-4. Status Indicator Codes
Component Indicator Condition
Power-on
indicator Green Solid
Blinking
Off
Power On S0/S1
BMC critical condition event in Power On
mode S0/S1
Power Off mode S4/S5
Amber Blinking
Off
BMC Critical condition event in Power On
mode S0/S1
BMC Critical condition event in Power Off
mode S4/S5
Power On S0/S1
Power Off S4/S5
System
identification
indicator
Blue Solid
Off
IPMI through Chassis Identify Command On
or ID Button Press ID On
IPMI through Chassis Identify Command Off
or ID Button Press ID Off