Dell PowerEdge C6145 - Manual (Page 93)

Using the System Setup Program | 93
Token Setup Option Description
ROMs (if the devices are available)
0053 BOOTSEQ_DEVLST
For the next system boot, set the IPL
priority to: diskette, IDE CD-ROM,
hard drive, option ROMs (if the devices are
available)
0054 BOOTSEQ_CDROM
For the next system boot, set the IPL
priority to: IDE CD-ROM, diskette,
hard drive, option ROMs (if the devices are
available)
005C TOKEN_RBU_EN
Enable the system BIOS, on the next
reboot, to search for an operating-system-
initiated BIOS update image.
005Dh TOKEN_RBU_DIS
Disable the BIOS update. This value is set
by the BIOS on each reboot of the system.
006E NIC1 Option ROM
Enable the system’s primary embedded
network interface controller, but does not
enable the NIC’s associated PXE or RPL
boot-ROM.
0087 Onboard VGA prior Onboard VGA when system power on
0088 Add-in VGA prior Add-in VGA when system power on
009B Legacy USB Support Enable USB emulation
009C Legacy USB Support Disable USB emulation
00A1 Restore on AC power Loss
After an AC power loss, when AC power is
restored, the system will stay off.
00A2 Restore on AC power Loss
After an AC power loss, when AC power is
restored, the system will return to the state
was in when power was lost.
00A3 Restore on AC power Loss
After an AC power loss, when AC power is
restored, the system will power on.
00BB NIC2 Option ROM
Enable the system’s secondary embedded
network interface controller, but does not
enable the NIC’s associated PXE or RPL
boot-ROM.
00BC NIC2 Option ROM
Enable the system’s secondary embedded
network interface controller (full-function),
including its PXE boot-ROM.
00BF Remote Access Serial Console Redirection Off.