Mezzanine card, Removing the sas mezzanine card – Dell PowerEdge C6145 User Manual
Page 151
Installing System Components | 151
Assembly" on page 116.
5 Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.
Mezzanine Card
Removing the SAS Mezzanine Card
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Recommend to turn off the system, including any attached peripherals,
and disconnect the system from its electrical outlet.
2 Remove the system-board assembly. See "Removing a System-Board
3 Disconnect all the cables from the SAS mezzanine card.
4 Remove the three screws that secure the SAS mezzanine-card assembly
to the system-board assembly. See Figure 3-23.
5 Remove the SAS mezzanine-card assembly away from the mezzanine-
card bridge board on the system-board assembly. See Figure 3-23.