Dell PowerEdge C6145 - Manual (Page 94)

94 | Using the System Setup Program
Token Setup Option Description
00C0 Remote Access
Serial Console Redirection On, output to
COM1. See also token D7h.
00CA CS Sparing Enabled Disable Redundant memory.
00CB CS Sparing Enabled Enable Redundant memory.
00D7 Serial port number Console redirection to COM2.
00D8 Load Optimal Default Load Optimal Default.
0135 OnChip SATA Channel Disable Onboard SATA controller(s).
0137 OnChip SATA type
Onboard SATA controller(s) is set to Native
IDE mode.
0138 OnChip SATA type
Onboard SATA controller(s) is set to AHCI
mode.
0139 OnChip SATA type
Onboard SATA controller(s) is set to RAID
mode
013B OnChip SATA Channel Enable Onboard SATA controller(s).
0173 Hardware Prefetcher Disable CPU HW Prefetcher.
0174 Hardware Prefetcher Enable CPU HW Prefetcher.
01C4 ACPI SRAT Table Disable for ACPI SRAT Table.
01C5 ACPI SRAT Table Enable for ACPI SRAT Table.
021F Power Management This will set max. performance.
0221 Power Management Allow OS to control p-state.
0222 Power Management Enable APML control.
0224 Onboard VGA device Enable onboard VGA chip.
0225 Onboard VGA device
Disable onboard VGA chip, the BMC
remote KVM function can not work.
0231 CPU DownCore Mode Enable CPU 4 cores only.
0232 CPU DownCore Mode Enable CPU 2 cores only.
024D Wait For ‘F1’ If Error
Enable the BIOS from prompting for F1/F2
on error. BIOS pauses at F1/F2 prompt.
024E Wait For ‘F1’ If Error
Disable the BIOS from prompting for F1/F2
on error. BIOS pauses at F1/F2 prompt.
024F Quiet Boot
Enable the display of the splash or summary
screen, rather than the detail of the POST
flow.
0250 Quiet Boot Disable the display of the splash or