Dell PowerEdge C6145 - Manual (Page 160)

160 | Installing System Components
Figure 3-29. Removing and Installing the Mellanox Card
1 screw (3) 2 Mellanox card
3 mezzanine-card bracket
Installing the Mellanox Card
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Put the two ports of the Mellanox card through the two slots of the
bracket. See Figure 3-29.
2 Install the three screws to secure the Mellanox card to the bracket. See
Figure 3-29.
3 Install the Mellanox card assembly to the mezzanine-card bridge board
on the system-board assembly. See Figure 3-28.
4 Install the three screws to secure the Mellanox card assembly to the