Dell PowerEdge C6145 - Manual (Page 97)

Using the System Setup Program | 97
Token Setup Option Description
482A Serial port number Console redirection to COM1.
482B Terminal Type
The BIOS console redirection, if enabled,
operates in VT-UTF8 emulation model. See
also tokens BFh, C0h, and D7h.
4832 OnChip SATA type
Onboard SATA controller(s) is set to
AMD_AHCI mode
4840 Force USB First Disable USB drivers as first boot device.
4841 Force USB First
Enable USB to be the first boot device, the
priority is higher than PXE. It will take
effect on next boot.
4842 Redirection After BIOS POST The BIOS console redirection, if enabled,
continues to operate until boot loader.
4843 IPMI Detection Disable for BMC DUP execute.
4844 IPMI Detection Normally, enable IPMI detection.
4856 IOMMU Disable IOMMU device.
4857 IOMMU Enable IOMMU device.
4858 Secure Virtual Machine Mode Enable Secure Virtual Machine Mode.
4859 Secure Virtual Machine Mode Disable Secure Virtual Machine Mode.
485E USB 2.0 Controller Mode Set USB controller mode to Full speed.
485F USB 2.0 Controller Mode Set USB controller mode to High speed.
4860 BIOS EHCI Hand-Off Enable USB EHCI Hand-Off.
4861 BIOS EHCI Hand-Off Disable USB EHCI Hand-Off.
4866 CPU Power Capping Set CPU power state limit to P0.
4867 CPU Power Capping Set CPU power state limit to P1.
4868 CPU Power Capping Set CPU power state limit to P2.
4869 CPU Power Capping Set CPU power state limit to P3.
486A CPU Power Capping Set CPU power state limit to P4.
486E PSU Power Capping
Disable BMC power support throttle
control.
486F PSU Power Capping
Enable BMC power support throttle
control.
4871
SATA-AHCI Ports Auto Clk
Ctrl
Disable SATA-AHCI port clock control.
4872 SATA-AHCI Ports Auto Clk Enable SATA-AHCI port clock control.