Dell PowerEdge R715 - Manual (Page 104)

104 Installing System Components
1 Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2 Open the system. See "Opening the System" on page 78.
3 Locate the ISCSI KEY connector on the system board. See Figure 6-1.
4 Insert the NIC hardware key into the connector on the board. See Figure 3-14.
Figure 3-14. Removing and Installing a NIC Hardware Key
5 Close the system. See "Closing the System" on page 79.
6 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1 NIC hardware key 2 ISCSI KEY connector
2
1
book.book Page 104 Thursday, June 3, 2010 4:35 PM