Dell PowerEdge R715 - Manual (Page 62)

62 Using the System Setup Program and UEFI Boot Manager
Integrated Devices Screen
Option Description
Integrated SAS Controller
(Enabled default)
Enables or disables the integrated SAS controller.
User Accessible USB Ports
(All Ports On default)
Enables or disables the user accessible USB ports.
Options are All Ports On, Only Back Ports On, and All
Ports Off.
Internal USB Port
(On default)
Enables or disables the internal USB port.
Internal SD Card Port
(On default)
Enables or disables the internal SD card port.
Redundancy
(Mirror default)
Enables or disables the mirror mode for Internal Dual SD
Modules (if installed).
Embedded NIC1
(Enabled with PXE
default)
Enables or disables the operating system interface of the
embedded NICs. The NICs can also be accessed through
the system's management controller.
Embedded NIC2
(Enabled default)
Enables or disables the operating system interface of the
embedded NICs. The NICs can also be accessed through
the system's management controller.
Embedded Gb NICx
(Enabled default)
Enables or disables the integrated NIC. Options are
Enabled and Enabled with PXE. PXE support allows the
system to boot from the network.
MAC Address Displays the MAC address for the integrated 10/100/1000
NIC.
Embedded NIC3 and
NIC4
(Enabled default)
Enables or disables the operating system interface of the
embedded NICs. The NICs can also be accessed through
the system's management controller.
OS Watchdog Timer
(Disabled default)
Aids recovery of the operating system, if your system
stops responding. If set to Enabled, the operating system
is allowed to initialize the timer.
Embedded Video
Controller
(Enabled default)
Enables/disables BIOS support for the Embedded Video
Controller.
book.book Page 62 Thursday, June 3, 2010 4:35 PM