Dell PowerEdge R715 - Manual (Page 114)

114 Installing System Components
3 Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 90.
4 Remove the cooling fan assembly. See "Removing the Cooling Fan
Assembly" on page 100.
5 Disconnect the cables connected to the card. See Figure 3-18.
6 Bend both the alignment guides outward and pull the storage controller
card out of the connector. See Figure 3-18.
7 Close the system. See "Closing the System" on page 79.
Figure 3-18. Removing and Installing the Integrated Storage Controller Card
1 expansion card riser 1 2 SAS data cable connectors (2)
3 SAS data cables (2) 4 integrated storage controller card
5 alignment guides (2) 6 integrated storage controller card connector
6
1
4
5
2
3
book.book Page 114 Thursday, June 3, 2010 4:35 PM