Dell PowerEdge R715 - Manual (Page 81)

Installing System Components 81
Figure 3-4. Removing and Installing a Hard-Drive Blank
Installing a Hard-Drive Blank
1 If installed, remove the front bezel. See "Removing the Front Bezel" on
page 77.
2 Insert the drive blank into the drive bay until the release button clicks
into place.
3 If applicable, replace the front bezel. See "Installing the Front Bezel" on
page 77.
1 hard-drive blank 2 release button
1
2
book.book Page 81 Thursday, June 3, 2010 4:35 PM