Dell PowerEdge R715 User Manual
Page 165
Troubleshooting Your System
165
7 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
8 If the problem is not resolved, turn off the system and attached
peripherals, and disconnect the system from the electrical outlet.
9 Open the system. See "Opening the System" on page 78.
10 Remove all expansion cards installed in the system. See "Removing an
11 Close the system. See "Closing the System" on page 79.
12 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
13 Run the appropriate online diagnostic test.
If the tests fail, see "Getting Help" on page 183.
14 For each expansion card you removed in step 10, perform the following
steps:
a
Turn off the system and attached peripherals, and disconnect the
system from the electrical outlet.
b
Open the system. See "Opening the System" on page 78.
c
Reinstall one of the expansion cards.
d
Close the system. See "Closing the System" on page 79.
e
Run the appropriate diagnostic test.
If the tests fail, see "Getting Help" on page 183.
book.book Page 165 Thursday, June 3, 2010 4:35 PM