Dell PowerEdge R715 User Manual

Page 26

Advertising
background image

26

About Your System

E1243 CPU # VCORE

Regulator

failure.

Contact

Support.

Processor voltage regulator

failed.

Reseat the processor. See

"Troubleshooting the

Processors" on page 166.
If the problem persists,

see "Getting Help" on

page 183.

E1310 Fan ## RPM

exceeding

range. Check

fan.

RPM of specified fan is

outside the intended

operating range.

See "Troubleshooting

System Cooling

Problems" on page 155.

E1313 Fan

redundancy

lost. Check

fans.

The system is no longer fan

redundant. Another fan

failure would put the system

at risk of over-heating.

Check LCD for additional

scrolling messages. See

"Troubleshooting a Fan"

on page 156.

E1314 Critical

system

cooling loss.

Check fans.

All fans have been removed

from the system.

Ensure that the fans are

properly installed. See

"Troubleshooting a Fan"

on page 156.

E1410 System Fatal

Error

detected.

A fatal system error

detected.

Check LCD for additional

scrolling messages.

Remove AC power to the

system for 10 seconds and

restart the system.
If the problem persists,

see "Getting Help" on

page 183.

E1414 CPU # temp

exceeding

range. Check

CPU heatsink.

Specified processor is out of

acceptable temperature

range.

Ensure that the processor

heat sinks are properly

installed. See

"Troubleshooting the

Processors" on page 166

and "Troubleshooting

System Cooling

Problems" on page 155.

Code

Text

Causes

Corrective Actions

book.book Page 26 Thursday, June 3, 2010 4:35 PM

Advertising