Dell PowerEdge R715 - Manual (Page 147)

Installing System Components 147
13 If applicable, replace the expansion card risers. See "Installing Expansion-
Card Riser 1" on page 111 and "Installing Expansion-Card Riser 2" on
page 113.
14 If applicable, replace all expansion cards and the integrated storage
controller card. See "Installing an Expansion Card" on page 106 and
"Installing the Integrated Storage Controller Card" on page 115.
15 Slide the front-chassis assembly back into the system.
16 Connect the cables to the system board assembly, SAS backplane, control
panel board, and the optical drive.
17 Route the power/data cables along the chassis wall. See "System Memory"
on page 92.
18 Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 91.
19 Close the system. See "Closing the System" on page 79.
20 If applicable, replace the front bezel. See "Installing the Front Bezel" on
page 77.
21 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
book.book Page 147 Thursday, June 3, 2010 4:35 PM