Figure 3-29, D. see figure 3-29, See figure 3-29 – Dell PowerEdge R715 User Manual
Page 145
Advertising
Installing System Components
145
17 Hold the processor board by the handle and the board edge
(see Figure 3-29). Angle the processor board out toward the back of the
system and lift the board out of the chassis.
18 To remove the I/O board, pull the release pin and slide the I/O board
toward the front of the system. Carefully lift the I/O board out of the
chassis.
Figure 3-29. Removing and Installing the System Board Assembly
1
power distribution board
2
release pin
3
I/O board
4
tab
5
high-speed connector
6
guide pins (2)
7
release levers (2)
8
processor board
9
handle
8
3
5
4
6
7
2
1
9
book.book Page 145 Thursday, June 3, 2010 4:35 PM
Advertising