Cooling shroud, Removing the cooling shroud – Dell PowerEdge R715 User Manual
Page 90
90
Installing System Components
Cooling Shroud
The cooling shroud covers the memory modules and provides air flow to
the system.
Removing the Cooling Shroud
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is
not covered by your warranty. Read and follow the safety instructions that
came with the product.
CAUTION:
Never operate your system with the cooling shroud removed. The
system may get overheated quickly, resulting in shutdown and loss of data.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening and Closing the System" on page 78.
3 Remove the RAID battery from the battery carrier. See Figure 3-9.
4 Hold the touch points and gently lift the cooling shroud away from the
system. See Figure 3-9.
book.book Page 90 Thursday, June 3, 2010 4:35 PM