Installing an optical drive – Dell PowerEdge R715 User Manual
Page 86
86
Installing System Components
Figure 3-7. Removing and Installing the Optical Drive
Installing an Optical Drive
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is
not covered by your warranty. Read and follow the safety instructions that
came with the product.
1 If installed, remove the front bezel. See "Removing the Front Bezel" on
2 Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
3 Open the system. See "Opening the System" on page 78.
4 Slide the optical drive into the optical drive bay until the blue release tab
snaps into place. See Figure 3-7.
1
power/data cable
2
release tab
3
optical drive
1
2
3
book.book Page 86 Thursday, June 3, 2010 4:35 PM