AVer NXU8000 - Manual (Page 121)

109
(2) Protocol: To select the protocol, click Setting button (see Setup POS Protocol)
(3) Skip first: Set the number of lines you want to be removed
(4) Start Testing: Click to test POS setting. You will see a test result on the right side of POS
Mapping window.
(5 ) Setup…: Set the COM Properties. If you are not sure, please contact your POS service
provider.
(6) Port Setting: Select the Local or Remote port to where it is connected.
Local - select the COM port number which is connected.
Remote
– Use the UDP protocol for remote connection if POS system can
broadcast to Internet. Enter the IP address of the remote station.
(7) Map to Channel: Select to which camera number to display the transaction text.
(8) Text Filter: Enter the word you want to be removed.