AVer NXU8000 - Manual (Page 153)

141
5.3 Recording Setting
In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving,
and click Default to revert back to original factory setting.
i
Some of functions will not be available when the camera type is an IP camera.
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the
ALL check box. To select more than one camera, Right click on the camera icon. To select one
camera only, Left click on the camera icon. The camera icon turns red when it is selected. The
camera icon will be different that depends on the camera type.
IP camera icon Analog camera icon
i
Analog camera only support for NV series.