AVer NXU8000 - Manual (Page 127)

115
Advanced Setting
To setup POS text display position, text font
and color.
1. In the System Setting dialog box, POS
section, click Setting >> Advanced
Setting
2. Mark Show POS Text to allow POS data
to be display on surveillance screen.
3. If user doesn’t want POS data to be scroll
up, mark Stop scroll POS Text and enter
the time to delete POS text at Erase POS
text after column.
4. Select the POS data display position on
surveillance screen – Left-Top, Left-
Bottom, Right-Top, or Right-Bottom.
5. Mark Multiple Window to allow more than
one iPOS live data window (see also iPOS Live in Preview mode) display on the preview screen
mode.
6. Mark Save Window Position that iPOS live data window position (see also iPOS Live in Preview
mode) will be saved as next time call out position when close.
i If user has changed dual monitor to single monitor, please un-
selected “Save Window
Position
” function to prevent the iPOS live window stay in 2 nd monitor screen when user call
out iPOS live window.
7. Select the Cameras of iPOS live data that want to be display on Preview mode when the iPOS
Live function has been enabled. To select all cameras, mark All.
8. To change the POS data font and color, click Font.
9. When it is done, click Save to complete the configuration.
POS Database Setting
User can export the POS database to another
save location or storage device. Click to
change the save path. Mark Remove POS
data after the POS data will be delete from
DVR hard disk on the day that user has setup.
Also, mark Move to: user can save the POS
data to another folder on DVR when the POS
data is removing. Click to set a storage
path.