AVer NXU8000 - Manual (Page 219)

207
that is when the WebCam 2-Way Talk button is activated. (See also Chapter 8.1 #6 ). The default port
of voice phone is 9999.
(8) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the Time Server IP address or
domain name. Select Automatic Synchronize time to set automatic synchronize time on a daily basis.
(9) 3GPP
Enable 3GPP that allows user to use browser on the mobile phone to view recorded video. Just enter
http://DVR Server IP/3GPP on the browser of mobile phone, and then, user will receive the recorded
video from DVR server. Fill the RTSP PORT for 3GPP connection. Select the video size for
transmitting to user’s browser on the mobile phone.
(10) Other Configuration
- Enable Original Security Protocol
Enable new version DVR system to accept remote software with former version. For example,
if user uses CMS version 7.3 and connect to DVR server with version 7.7, and then, user has
to enable this option to make it work. It is due to that DVR system has some new security
protocol in DVR with version 7.7
and newer version, and it’s not compatible with old remote
software.
- Enable White List
An access permit list for the remote accessing of DVR server. Enter the IP address and click
Add. Or, enter a range of IP address and click Add. To delete the IP from the list, select the IP
and click Delete button. To reset the input, click Clear button.