AVer NXU8000 - Manual (Page 154)

142
(2) Recording Mode
 Weekly Record Mode: Setup the recording schedule by week.
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical block 1 to 7
represent the day in the week block (Sunday to Saturday). To record in full 24 hours and 7 days a
week, select the recording mode and click the  button. If you want to only record at a particular time
or day, click Schedule button and select the Recording Mode , and then click on the time or day
blocks. When the system starts recording a red triangle mark would appear at the upper left corner of
the screen.
 Daily Record Mode: Setup the recording schedule by date.
1. Select the date from calendar.
2. Then, select the recording mode
– Always, Motion, Smart, Voice detection, No Recording,
Keyframe.
3. Click on the hour that wants to record. The horizontal blocks from 00 to 23 represent the time
in 24-hour clock.
4. User should see the day recording schedule list in Schedule List section.
5. If user wants to repeat the day recording schedule, mark the check box of the Date in
Schedule List.
6. After setting all date recording schedule, click OK back to Recording mode window.