AVer NXU8000 - Manual (Page 264)

252
Camera Setup
Select the camera from different DVR servers in order to monitor in one group. The selected cameras
will be played on Monitor screen (see
Using the iMatrix Application ).
1. Click Setup.
2. In the Authorization dialog box, enter the administrator User ID and Password.
3. Click Camera.
4. Click Add to create a monitor set. The monitor set can be added up to 1000 monitor set. Click
OK to save the setting.

Name: Enter a name for the monitor set (12
characters only).
 Playback Setting
- Enable Playback: Enable/disable to
allow playback on monitor screen.
- Show POS message: Enable/disable
display POS information on monitor
screen.
- Start Playback Before: Enter the time
(sec.) when start playback will start from
the present time backward the time user
has setup.

Preview Setting
- Frame Rate: User can set the camera
transmitting Frame Rate for preview, but
the real transmitting frame rate depends
on camera setting.
5. After the Monitor set has been created, select the DVR server. And then the camera channels of
the DVR server will display on the Camera Select window. User can combines different cameras
from different DVR servers as a monitor set. And all camera channels can be selected by
different Monitor set raptly. Click < and > to go back previous and go to next camera screen.
6. User can depend on the monitor size to select the screen type – 4:3 (regular screen monitor) or
16:10 (width screen monitor). The 4:3 and 16:10 screen type support different monitor layout.
7. Select the camera that user wants to add, and then click Add button. To add all the cameras,
click Add All. The selected camera channel will be added to Monitor Layout window. User can
add up to 64 cameras in 4:3 screen type and 80 cameras in 16:10 screen type. To remove the