Manual updates – AVer NXU8000 User Manual
Page 2
i
Manual Updates
Following are listed the new functions for the version 7.9.0.0033 and above of NV/NXU surveillance
software.
[Note] User can press F1 to check DVR/NVR firmware version.
New Functions
Setup Wizard: A system setup wizard that will guide the user to setup the DVR system step by
step.
Software License: Allows user to upgrade the IP camera channel of DVR system through the
software license that user has purchased.
Schedule by date: Allows user to setup recording schedule by date.
IPCam PnP: Allows user to connect AVer IP camera series without any configuration; just plug and
play.
Active IP:
Allows user to configure AVer IP camera series on DVR system; the IP camera patch
must be v. 7.0.0.118 or above.
ONVIF PTZ: DVR/NVR system supports IP PTZ function on the IP camera that is connected
through ONVIF protocol. The IP camera patch version must be v. 7.0.0.123 or above.
NV /NXU and OS supported table
OS
Function
Windows XP
Windows 7
NV3000/NV5000
NV7000
NV9000E/9000H
NV6000E
NV8000E4
NV3000/NV5000
NV7000
NV9000E/9000H
NV6000E
NV8000E4
Setup Wizard
N/A
N/A
N/A
Yes
Software
License
N/A
Yes
N/A
Yes
Schedule by
date
N/A
Yes
N/A
Yes
IPCam PnP
N/A
Yes
N/A
Yes
OS
Function
Windows XP
Windows 7
NXU8000 series
NXU8000 series
Setup Wizard
N/A
Yes
Software
License
Yes
Yes
Schedule by
date
Yes
Yes
IPCam PnP
Yes
Yes