AVer NXU8000 - Manual (Page 136)

124
 Relay Setting: To setup relay device that is embedded on the camera.
1. Click the drop-down list and select the relay ID number.
2. Enter relay name in Name column
3. The DVR system automatically detects the camera and input relates information.
In the Content section, enter relay description.
4. In the test section, click Test to trigger relay. Red is high and Green is low.
5. Click OK to exit and accept the setting and Cancel to exit without saving the
setting.
 Direct Link by IE: Using IE browser to connect to camera and view the real time
video. Click Direct Link by IE，the IE browser will pop up and connect to camera.
The video viewing interface will be varied by different brand of camera.
(13) Video Screen
Display the video of the selected camera.
(14) IP Cam PnP Setup
Connects AVer IP camera series only. Please see
Chapter 5.2.7 for detail.
(15) Camera list
List all available cameras for grouping. User can drag the camera to (13) Video screen to view
camera live video.
(16) Group
User can create several camera groups for managing purpose. All cameras can be group into several
different groups (see also
Chapter 5.2.6 ).