AVer NXU8000 - Manual (Page 265)

253
camera from the Monitor Layout window, select the camera and right-click to select Recover.
To delete all cameras, click Clear All button. User can enter a description for a channel. Click a
camera in Monitor Layout window and enter the description in Camera Description. The
camera description will display on the channel of the monitor screen.
i
User can drag the camera channel to Monitor Layout window without using Add button.
8. In Monitor Layout window, user also can set the channel to receive the alarm events from DVR
server.

Matrix: set the selected channel to receive and display the alarm event from selected
DVR servers. Click Setup to select the DVR servers. Enable the Retrieve time to set a
period time (0 ~ 255 sec) for alarm event to display. If the re
trieve time doesn’t enable, the
alarm event will display on screen until next alarm event come in.
i
On the DVR site, user need to enable and configure the matrix to send iMatrix
(please refer to Alarm Setting of DVR manual).
9. Click OK to save the setup. To exit without saving, click Cancel.
10. To delete the monitor set, select the monitor set in Monitor Select window and click Delete
button.
11. To modify the monitor set, select the monitor set in Monitor Select window and click Edit button.
12. To viewer different monitor set, click Monitor Controller from iMatrix main UI and drag the
monitor set to the monitor and press Apply button.
13. Also, user can call up the PTZ camera control panel by click PTZ button and select the PTZ
camera to operate. The PTZ icon will be available when there are PTZ cameras in Monitor set.