To setup ftp – AVer NXU8000 User Manual
Page 227
215
To Setup FTP Setting
1. Next to the File Transmission via FTP check box, click Detail.
2. In the FTP Setting dialog box, enter the FTP Server (IP address), Port, ID and Password.
3. In Number of Pic text box, enter the number of sequence images that want to send when
file is transmitting. The maximum number of picture can be transmitted are 16.
4. If user wants to send the recorded image
before alarm occurs, enter the time that
before alarm occurs in Before
alarm(sec.).
5. Upload image: Select the camera that
the images will be captured and send
when the any alarm is triggered. If user
select the Alarm Camera, then only
when motion trigger, video loss, missing
or suspicious object/scene change will
send out the alarm image.
6. Click OK to exit and save the setting and
Cancel to exit without saving the setting.