AVer NXU8000 - Manual (Page 129)

117
- Name
Change the camera name
- Description
Add a short comment
(4) Video Adjustment (Analog Camera Only)
Adjust the Brightness, Contrast, Hue and Saturation of the selected camera.
(5) Noise Reduction (Analog Camera Only)
Reduce undesirable video signal and improve the quality of the video.
i
Noise Reduction uses lots of CPU resource. Please use this feature only if it is really
necessary.
(6) Auto Brightness Control (Analog Camera Only)
Automatically adjust the brightness.
(7) Night View (Analog Camera Only)
Automatically adjust the exposure to make the image more visible especially when the site is dark. You
can only use this function when the Auto Brightness Control is enabled.
(8) Enable Deinterlace
To enhance the video quality. Set the Enable Deinterlace mode to #1, if you are capturing motionless
picture and #2, if it captures lots of movement.
(9) Object Counting
Select the two regions on the screen and the system will count the objects that appear from one
selected region to another selected region. (See also
Chapter 5.2.3 ).
i
The DVR system only supports 4 channels for object counting.
(10) FaceFinder
To setup the capture of human face image from live or recorded video (See also Chapter 5.2.4 )
i
The DVR system only supports 4 channels for FaceFinder.
(11) PTZ Tracking
Enable/disable object tracking of the PTZ camera (see also Chapter 5.2.5 )
i
The PTZ tracking only available for the PTZ/IP PTZ camera.
(12) Input
Select the type of video camera input that you are using.
- Analog Camera
The video source is coming directly from camera that is connected to the NV series card.
- Remote DVR
The video source is coming from another DVR server. In the
Remote DVR dialog box, enter the server IP, port number, user
ID, password and select the camera number. If you are not
sure of the server IP and port, please check the DVR server IP
address in Network setting.
i
The remote DVR doesn’t support audio and PTZ function.