AVer NXU8000 - Manual (Page 164)

152
5.5 Schedule Setting
Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly
or one time. The number from 00 to 23 represent the time in 24-hour clock. The left most column
display the days in a week.
To Set the Schedule Setting:
1. Select the date in the calendar. Use and buttons to shift the calendar to the left or right.
2. Select the condition you want to schedule in the drop down list.
- Record
Activate all the cameras to start video recording at the set time based on the Recording setting
(see also
Chapter 5.3 ).
- Backup
To assign backup path, click .
 Mirror Backup: Save a copy of all the data at the set time and specified backup path.
 Incremental Backup: Only backup the data that are not yet included in the archive from
last time.
 Delete or overwrite old backup file when the HDD is full: The DVR system will
automatically erase the old backup data when the hard disk is full.
i
Make sure the backup folder and storage folder are not on the same drive.